Defensive Driving

Let’s face it. We all could improve our driving. Car accidents are the leading cause of death for humans under the age of 30, and only drops to second and third cause of death up to age 65. The top three causes of vehicle accidents are speeding, driving under influence, and distracted driving. With all the drunks and careless others texting and driving, it pays to have skills in your toolbox to get home safely. The most effective tool is Defensive Driving.

 

Defensive Driving is operating your vehicle in a manner to prevent accidents in spite of the actions of others or in the presence of adverse driving conditions. It requires a constant vigilance! You watch for the illegal acts and errors of other drivers, and make timely adjustments in your own actions so that the actions of other drivers will not involve you in an accident.

 

Driving defensively is a skill I mostly developed after I started riding motorcycles. Riding a motorcycle changed my perspective on driving. The dangers are too hard to ignore when you get out of the bubble of a car or truck. The pavement is RIGHT THERE! And, it looks like it would be painful to land on.

 

SEE (SEARCH, EVALUATE, EXECUTE) is a driving strategy that I learned at a class I attended with the Motorcycle Safety Foundation.  This strategy has helped me reduce factors that contribute to accidents, and is applicable to operating any vehicle.  Below you will find a summarization of the process. We strongly encourage you to learn more, and to apply the strategy in your life.

 

The first stage is SEARCH. This means to actively scan and identify factors that could increase the chance of an accident. Scan the area directly in your path, not just directly in front of you, but far ahead of you as well. Look for the three primary categories of information that should be monitored:

  1. Traffic control devices and signs
  2. Road characteristics and surface conditions
  3. Other road users

Good searching technique applies to all directions. Yes, watch where you are going, but also frequently check your mirrors.

 

The next stage is EVALUATE. This means consider potential problems arising from the interaction of the factors discovered while SEARCHing. Put simply, you try to anticipate where problems could arise, and form a plan in the event the problems… well, cause a problem.

Consider the hazards that could arise from searching for traffic control devices and signs. Think about the big picture as you evaluate, and think about other people’s perspective and what they see. Understand that other drivers may not see control devices like stop signs and traffic lights, etc. Also evaluate other road users, not just other wheeled vehicles travelling at (potentially) high rates of speed, but also pedestrians and animals. Know the limitations of your abilities (did you forget to put your contacts in this morning?), and the limits of your vehicle. Compare these limitations to the traffic and road conditions.

EVALUATING is mostly about forming potential plans of action, based on the information you collected while SEARCHing your environment. This stage is a form of risk management; try to read the information discovered while SEARCHing to create a “cushion of safety.”

 

The last E is for EXECUTE. This refers to the motor skills used to prevent or avoid the hazards, and is the stage used when a hazard presents that could cause an accident. After EVALUATING or reading a situation, you decide on a course of action and EXECUTE it. Ideally, you decide on the best course of action, but try not to second guess or pause. In the event of a problem arising, time and space are typically at a premium.

Decisions are executed in a few different ways. The most passive is communication. Communicate your intentions as time allows. Use lights, horns, hands, eye contact, etc. You can also change your speed or position. The degree to which you adjust your speed or position depends mostly on the hazard that has arisen, so try to keep as much space as possible to react.

 

Driving defensively is about taking steps to actively manage your situation and attempting to prevent other driver’s actions from causing an accident. Driving defensively requires a serious commitment. A driver must commit their constant attention to the road. Also, SEE is a process. Ideally, you are constantly searching and evaluating your options to create a “cushion.” Then, you are prepared to execute quickly.

Unsafe Conditions and Actions

How many times have you burnt yourself on a kitchen stove or nicked your finger with a knife because you had grown complacent, or were not paying attention? Or perhaps you burned yourself because you were in a hurry, tired, or thought you would get away with it because you had “been cooking for years without incident.” These accidents can be prevented by identifying unsafe conditions and then choosing safe actions.

First, let’s address: what are unsafe conditions? Conditions are the existing state of the environment around you, and the circumstances affecting the way you live or work. An unsafe condition is a condition where something exists that varies from a normal accepted safe condition. If not acknowledged, unsafe conditions can result in injury, death, or property damage.

Our kitchens have sources of heat and sharpened objects. The existence of these conditions put us at risk of an accident. Most of the time, we recognize the hazardous conditions and can adjust our actions to complete our tasks safely.

An unsafe act is the performance of a task that is conducted in a manner that may threaten the safety of yourself or those around you.

Some unsafe acts are a result of flagrant disregard of established rules, and should be reported and handled with appropriate disciplinary action. However, the majority of the unsafe acts are unintentional, and directly related to our behavior. The causes generally fall into one of the following categories:  rushing to complete a task (the most common), complacency, fatigue, and frustration.

In the workplace, unsafe acts are often attributed to perceptions of pressure for production. Have you ever heard someone say they “ignore safety rules to get the job done?” What about “bending the rules that involve little or no risk?”

We all know that there must be a cause for an incident to happen. Causes of incidents are tied to both unsafe conditions and acts. Returning to the example in our kitchen, how many of us have stood on a narrow stool or chair to reach the top shelf in our cabinets, rather than take the time to get a step ladder? The unsafe act of standing on an unsteady chair would not exist if the condition (the height of the top shelf, or the lack of go-go-gadget human arms) did not exist.

Learning to properly identify unsafe conditions and adjusting our actions appropriately helps us safely navigate our homes and workplaces.

As always, talking about the safety of the conditions surrounding us reduces the chances for incidents. Work with your coworkers to identify unsafe conditions. And if you see an unsafe act performed, or about to be executed, please speak up!

Line Break Safety Plan and Permitting

Installing a new pipe system typically comes with certain unexpected risks. These challenges and problems must be addressed in order to ensure safety and mitigate those risks while modifying a functioning pipe system.

Because of the complexity and the hazards associated with modifying or changing a pipe system, establishing a formalized a process that will help protect each other from injury from either chemical contamination or an unexpected release of pressure.  Here are a few tips on what to cover when creating a Line Break Permitting Process:

  • Define the Scope of Work including identification of the material in the Pipe System and understand if the system is pressurized. Get the MATERIAL SAFETY DATA SHEET (MSDS) and understand the pressure in all sections of pipe. Discuss the scope with all parties, this may include customers, engineering or maintenance departments, Project Managers… Seek out the people who understand the specifics of the pipe system you are modifying.
  • Create a Work Plan that includes a Safety Plan. In the Safety plan, discuss the PPE and boundary requirements necessary to protect your employees and the others working nearby, property, whether yours or your customers. Consider the safety items that need to be communicated with the people performing the work. For example: locate and verify working condition of nearest eye wash shower stations, plan to control or collect any residual liquid and know how to correctly dispose of it.

Before beginning work, review and communicate to everyone involved the Safety Plan, a Job Safety Analysis, and Line Break Permit followed with creation of the boundary and verification of all PPE. A few other things to consider:

  • Verify all pumps and valves are locked out. If applicable, ask the customer or “owning department” to make the first line break at a low point on each pressurized loop and release all pressure.
  • After all pressure is released, drain and flush each pipe, as required. (Flushing is not always required to make the system safe.) Verify with the MSDS sheet.
  • As work begins on the pipe system treat each pipe as if it still pressurized and contains a hazardous material. It is critical to wear all appropriate PPE based on the MSDS and potential system pressures.

Piping Systems are a part of our daily lives. They help us live and work more efficiently. People typically do not pay attention to the various piping systems around them, nor do they realize the potential hazards when disturbing them. Paying attention and creating a plan for breaking into functioning piping systems helps protect the lives of ourselves, our employees, and our coworkers.